When Night Falls, the Sun Is Still Generating Power — Understanding Concentrated Solar Power
Adapted from "光热视界" (CSP Horizon), June 2026
Can solar power keep working when there is no sunlight? On the Gobi Desert flats of Dunhuang, Gansu Province, the answer is yes.
At dawn, more than 12,000 heliostats slowly turn east, beginning their daily chase of the rising sun. As the sun climbs, these giant mirrors continuously adjust their angles, focusing sunlight with precision onto the top of a 260-meter receiver tower. Inside the tower, flowing molten salt is heated to above 560°C, "storing" the day's abundant solar energy in thermal form. When night falls and photovoltaic (PV) stations gradually go dark, the heat stored in that molten salt keeps producing high-temperature steam, driving steam turbines and feeding power into the grid without interruption.
This is not a scene from science fiction. It is the daily routine at the Dunhuang 100 MW molten-salt tower CSP plant — one of China's first national CSP demonstration projects.

In most people's minds, solar power equals PV panels. Yet alongside the well-known photovoltaic route, there is another technology path that is equally important but far less known — Concentrated Solar Power (CSP). Unlike PV, which converts light directly into electricity, CSP takes a different path: concentrate first, store heat second, generate power last. And it is precisely this extra "storage" step that makes CSP one of the very few renewable technologies today that combines power generation with long-duration energy storage in a single system.
I. Putting Sunlight on the Shelf
If PV is a "generate-and-use-instantly" power plant, CSP is more like a solar-driven thermal power station.
CSP concentration architectures come in eight main forms — solar tower, parabolic trough, linear Fresnel, parabolic dish, rotating tower, multi-reflection, transmission-type, and others. Among them, tower and dish systems are point-focus designs, while trough and linear Fresnel are line-focus designs.

The working process is not complicated. Take a tower plant as an example: first, a vast field of heliostats tracks the sun continuously, reflecting and concentrating sunlight onto a receiver; the molten salt inside the receiver absorbs the solar radiation and heats up rapidly, then flows into a thermal storage tank. When electricity is needed, the hot salt passes through a heat exchanger to produce high-temperature, high-pressure steam that drives a turbine. Finally, the cooled salt returns to the system and circulates again.
The whole process looks more complex than PV — but it buys one decisive advantage: temporal freedom.
Conventional PV is visibly hostage to weather and the day-night cycle; once the sun sets, it stops working, and the grid must lean on electrochemical batteries and other technologies to stay stable. CSP, by contrast, uses molten-salt thermal storage to hold the day's surplus solar energy for hours — even more than ten hours — and keeps generating at night. It is, in the truest sense, "solar power that never clocks out."
Commercial CSP plants today predominantly use nitrate molten salt as the storage medium, operating at around 560°C with storage durations of 6 to 15 hours. After more than a decade of engineering practice, molten-salt thermal storage has become one of the most mature and reliable core technologies in CSP.
II. From Demonstration Projects to Industrial Deployment
People used to assume CSP was a long way from industrialization. In fact, it has already left the laboratory and is becoming an integral part of China's new energy system.
At the end of 2018, the Dunhuang 100 MW molten-salt tower CSP plant was officially connected to the grid. The plant occupies roughly 7.8 square kilometers, its mirror field composed of more than 12,000 heliostats, paired with an 11-hour molten-salt storage system. Its designed annual output is about 390 GWh — enough to meet the annual household electricity needs of 470,000 people — while saving roughly 121,900 tonnes of standard coal and cutting 304,900 tonnes of CO₂ emissions per year. It is not only one of China's first national CSP demonstration projects, but also the country's first commercially operated 100 MW-class tower CSP plant — a critical step in China's large-scale CSP development.
Soon after, the Delingha 50 MW molten-salt tower CSP plant in Qinghai entered commercial operation. Through years of continuous operation and control-system optimization, its actual annual generation has repeatedly exceeded design targets — proof that China now commands the full chain of capabilities: CSP plant design, construction, commissioning, and long-term stable operation.
In recent years, the industry's development logic has shifted again.
If early CSP plants were mostly built as standalone projects, today a growing share of new projects adopt an integrated "CSP + PV" model.
In Hami, Xinjiang, a large-scale integrated energy base combines 900 MW of PV with 100 MW of CSP. During the day, PV does the heavy lifting while surplus solar energy is stored by the CSP system; at night, the CSP system keeps supplying stable power — materially raising the continuous output capability of the entire renewable base.

This model plays to the strengths of both technologies: PV is cheap and fast to build, ideal for bulk generation; CSP stores heat for long durations and stabilizes renewable output. The two complement each other rather than compete.
III. Why Is the World Paying Attention to CSP Again?
CSP is not, in fact, a new technology. As early as the 1980s, the United States and Spain began building commercial CSP plants. But as PV module prices fell rapidly, CSP entered a long trough.
Its return to center stage in recent years has one primary driver: the rapidly rising demand for long-duration energy storage.
As the share of wind and solar capacity keeps climbing, the "weather-dependent" character of renewables becomes ever more pronounced. How to keep the power supply stable when there is neither sunlight nor wind is a problem that any new-type power system must solve.
Compared with lithium-ion batteries — better suited to short-duration storage — CSP uses molten-salt thermal storage to sustain output for hours, even more than ten hours, making it better suited to grid peak-shaving and long-duration firm power. The International Energy Agency (IEA) therefore regards long-duration storage technologies, CSP included, as an important pillar of future power systems with high shares of renewables.
According to the International Renewable Energy Agency (IRENA), cumulative global CSP capacity was approaching 7 GW by the end of 2024; with multiple large Chinese projects successively completed and commissioned, the global industry has re-entered a growth phase. China, for its part, is deploying more and more "CSP + PV" and "CSP + wind" projects inside its large desert, Gobi, and arid-region renewable bases — offering a new solution for the stable absorption of renewable energy.
IV. Beyond Power Generation
Beyond the power system, CSP technology has a much broader application space.
High-temperature heat can be used directly for industrial process heating, seawater desalination, green hydrogen production, and high-temperature chemical processes — enabling an integrated "power + heat + storage" energy utilization model. As high-temperature molten salts, novel storage materials, and supercritical CO₂ power cycles continue to advance, the efficiency and economics of CSP will keep improving.
CSP may never cover every rooftop the way PV does. But in the new energy era, it carries a different, arguably more important mission — turning solar energy from an "intermittent resource" into a "dispatchable one."
In the past, when we talked about solar power, we pictured rows of silently working PV panels. Yet out in the vast Gobi and desert lands, countless heliostats are quietly chasing the sun, storing daylight inside glowing-hot molten salt. By day, they collect the sun; by night, they release the light.
From Dunhuang to Delingha, from tower plants to gigawatt-scale "CSP + PV" energy bases, CSP is no longer a laboratory concept — it is real practice in China's energy transition.
When night falls and city lights stay bright, part of that electricity may well come from a ray of sunshine stored in molten salt earlier that day.
V. GX Insight
CSP should be valued as "storage that happens to generate," not "generation that happens to store."
Its strategic value rises with the renewable penetration rate, not with panel-style cost curves. When evaluating CSP assets, the right benchmark is not the LCOE of PV, but the system-level cost of firm capacity — the same yardstick used for gas peakers, pumped hydro, and 8+ hour batteries. Mispriced comparisons are where opportunity hides.
"CSP + PV" hybrids are a template for dispatchable renewables, and templates are replicable. The Hami model — cheap daytime PV bulk energy plus molten-salt-firmed night output — turns an intermittent resource into a schedulable product that grids and power markets can actually contract. Expect this architecture to export well beyond China, to high-irradiance regions in the Middle East, North Africa, Chile, and the US Southwest, wherever grids are struggling to absorb more PV.
The real chokepoints are in the supply chain, not the sunlight. Heliostat manufacturing at scale, high-temperature molten-salt handling, receivers, and supercritical CO₂ cycles are where engineering moats form. With global cumulative capacity still below 10 GW, the industry is where PV was two decades ago: whoever locks in core components, EPC know-how, and operating data early will hold asymmetric positions when long-duration storage demand fully reprices.
"The sun that sets is not gone — it is merely on deposit." Understanding CSP is not about betting against PV; it is about recognizing this: in a power system racing toward high renewable penetration, the scarcest commodity is no longer energy itself, but energy delivered on time.
References: IRENA, IEA, China National Energy Administration, People's Daily Online, SolarPACES, China Electricity Council, CSP Professional Committee of the China Renewable Energy Society, and the China CSP Industry Blue Book (2025). Data as of 2025.





Comments